Still using the same topology from Scenario 1 and Scenario 2. Configure the topology below using OSPF routing on single area.

Figure 1.

Answer will be provided tomorrow.

For your study and reference, you may have a look on these sources below.

• Cisco System 2006, Configuring OSPF, viewed 15 May 2006, http://www.cisco.com/…[cut]…chapter09186a00800b3f2e.html
  
• Gough, C 2005, CCNP BSCI Exam Certification Guide 3rd Edn., Cisco Press, Indianapolis. (ISBN: 1587200856)
• Sudjiman, D 2006, Single Area OSPF on Frame Relay Full Mesh Network, viewed 15 May 2006, http://www.davidsudjiman.info/?p=104
• Sudjiman, D 2006, Single Area OSPF on Frame Relay Hub-and-Spoke Network, viewed 15 May 2006, http://www.davidsudjiman.info/?p=105