No Joke!
by David Sudjiman ~ July 20th, 2008. Filed under: Cisco.
1% for CPU utilization? No Joke!
autostart = false
model = 3640
[localhost]
[[3640]]
image = c:\Users\dsudjima\Study\ios_dynamips\c3640-js-mz.124-19b.bin.image
workingdir = c:\Users\dsudjima\Study\dynamips_lab\rpvst\
ram = 128
slot0 = NM-1FE-TX
slot1 = NM-16ESW
slot2 = NM-16ESW
idlepc = 0×604f8144
Running on Intel Core Duo 1.83GHz 2GB RAM on Windows Vista 32-bit.
July 22nd, 2008 at 12:11 am
what ios version for run this ? and what idle pc value for that ios
thanks,
simman
July 25th, 2008 at 4:40 am
questions:
1. what type of routers
2: image used
3: cards installed
4: are these running fully configured
what is the idlepc value
July 25th, 2008 at 7:52 am
I would like to know the information above as well as what type of hardware and the OS you used, thanks!
July 26th, 2008 at 3:50 pm
Fantastic but one more question, how many routers were you running or did you get the idlepc off of just one router and this is the begining…
August 8th, 2008 at 3:58 pm
During the start it’s not very impressing.
Once you have configured IGP->BGP->Multicast, CPU utilization
might shoot to >50%, even with my Quad Core,2.4 GHz, 4GB system.
If you have some hints please share, i’m running InternetworkExpert’s dynamips lab, total 14 routing instants.
//Mustafa