David Sudjiman » Networking

InternetworkExpert updates its CCIE R&S Material

David Sudjiman — Wed, 12 Aug 2009 07:54:52 +0000

I’m actually countering my dissapointment to INE with good product updates they recently released.

First of all, I’m studying for CCIE R&S v4.0. Therefore, I need to have materials that specifically design for v4.0.

Looking to the WB1 I have from INE, I was quite surprised to know that INE updated the WB with additional Cisco IOS Optimized Edge Routing Configuration Guide, Release 12.4T. This is great!

I also noticed that in my account INE updated my CoD with newer version of R&S Advanced Technologies 5-Day Class-on-Demand v4.5. Anthony is teaching and he sounds like a circus announcer. Don’t get mad Anthony!

This is actually a very good thing to keep me awake while listen and watching CoD. The quality of the CoD I cannot really say as I haven’t watching it from day 1 to day 5.

Also, some bonuses from Brian Dennis for previous version of CoD. INe puts 4 parts of MPLS and 1 part of Zone-based FW.

Thank you INE, keep improving!

Heaps of Omnigraffle Stencils

David Sudjiman — Wed, 20 May 2009 14:11:17 +0000

I used Omnigraffle about a year ago then I remember I had difficulties to draw network diagram based on Cisco Stencil. I posted Cisco Stencils for Omnigraffle and that was pretty much the only available Cisco Stencil during that time.

I’m reopening my Omnigraffle ’cause I’m quite lazy to switch to other laptop and start googling for Omnigraffle stencils. I’m quite surprised to know that there is actually a site dedicated just only to provide free Omnigraffle stencils and it includes Cisco stencils. Graffletopia gives you heaps of Omnigraffle stencils for free. The quality is very good and although not all of Cisco stencil are available, it is actually enough to start the work.

Big thanks to Patrick Crowley for the initiative!

Kiwi Cattools

David Sudjiman — Wed, 01 Apr 2009 12:46:37 +0000

If you are looking for an application that can pushes config for many of your Cisco devices, Kiwi Cattools will be the perfect one.

It has been around for a while and recently was bought by Solarwinds in January 5th, 2009. But fear not, the freeware version will still be available for download and can use up to 20 devices while for $550 you can get the Enterprise Edition which provides unlimited devices.

I began to play with Kiwi Cattools with 3 devices running under Dynamips.

Starting with registering 3 3640-routers, I needed to define the model, name, and IP Address. The first registration could be cumbersome yet later you can just copy the entry and change the name and IP address assuming the device model and the rest are the same.

After you registered the devices, then you are provided with several built-in activities and it’s just enough to carry on your work.

I tried to push some configuration entries and it went very well. It also reported the activity and show whether it encountered errors.

Besides playing with push-config feature I also played with config comparison. This is a very good feature when you need to find what went wrong with your Change. I know some people swear by his life it can only be done via Excel yet now I found there is a better way to compare your config.

The comparison can also exported to HTML so you can view it on your browser. This is just so great.

I haven’t really try to use it extensively for work but Kiwi Cattools looks really promising.

PS. Yes, I also tried NetworkAuthority Inventory on Linux, but I couldn’t get it to recognize my 3640. Also, when I tried to install it in Windows, even until I finished writing this post, I still need to download the ActiveState Perl to get it working. I’ll try to post it some time.