Tag Archives: mstp

MST Notes


Spanning Tree Protocol (STP) is a protocol to ensure there is no loop in layer 2 network. This protocol was invented by Radia Perlman in 1985 and published as a standard originally as IEEE 802.1D-1990.

In essence, STP works by sending a probe to every layer 2 switches and decides which link should be block if there is a loop.

Initially STP was used with one instance. This is when there was no understanding of VLAN which was introduced later in IEEE 802.1Q. Mono Spanning Tree runs a single Spanning Tree for all VLANs. Since it uses one Spanning Tree instance for all VLANs, it lacks the ability to engineer one path over another. All VLANs will have to share the same path and fate.
Continue reading